ENGLISH
77
(4) “AUDIO SETUP” is selected
1
2
3
See page 71.
Use the and cursor buttons to select the
desired setting, then press the
ENTER button.
• DIGITAL OUT
Use this to select the digital output’s signal format.
• LPCM SELECT (96 kHz
/
48 kHz)
Use this to set the digital audio output when playing
DVDs recorded in linear PCM audio.
✽
To exit the audio setup mode
Use the and cursor buttons to select
“DVD SETUP MENU”,
then press the ENTER button.
• The screen returns to as it was in step 2.
Use the and cursor buttons to select the
desired setting, then press the ENTER button.
2
When “DIGITAL OUT” is selected.
• NORMAL (Factory default)
Make the selection when playing back in surround
playback a DVD that has been recorded with Dolby
Digital or DTS on this unit.
The Dolby Digital or DTS digital signal is also output
from the digital output jacks.
• PCM
DVDs that were recorded in Dolby Digital are
converted to linear PCM 48 kHz/16 bit (2 channels).
Make the selection when making a digital recording.
DVDs recorded with DTS are not converted and
digital recording is not possible.
✽
To exit the digital out mode
Press the ENTER button, you can go back to the
previous screen.
