ENGLISH
54
• The ADV-700 is equipped with an on-screen display (“OSD”) function that displays various types of information on the surround functions and
the disc on the screen when the function is set to DVD.
q Setup screen
• This is used to select the speaker system being used (quick system setting) and to change the function of the ADV-700 and various settings
when playing discs (system setting change and DVD setting change).
• The setup screen can be used regardless of the currently set function, but it cannot be operated while a disc is playing. Set the stop mode
first.
w Display of disc information
• When the function is set to DVD, the OSD displays information on the disc and appears when various playback functions are operated.
e Display of surround function
• When the function is set to DVD, information on the surround amplifier is also displayed and can be operated.
• The OSD for the surround function (AV OSD) can be turned on and off.
(The OSD for the setup screen and DVD disc information cannot be set to
“
OFF”.) Set to “ON” upon shipment from the factory.
✽ Set to “ON” upon shipment from the factory.
17
ON-SCREEN DISPLAY
1
With the function set to DVD, press the STATUS button for at
least 2 seconds.
•“AV OSD ON 0:1 OFF” is displayed.
Remote control unit Remote control unit
✽ The current setting is displayed in green.
2
Turn the AV OSD on or off.
Main unit Remote control unit
or :ON
or :OFF
✽ After several seconds, the display turns off and the setting is made.
NOTES:
• Depending on the disc being played, the picture may be
disturbed when the OSD turns on. This is not a malfunction.
If this should happen, set the AV OSD to “OFF”.
• The OSD is also output to the VCR video output terminals.
Do not perform setup or OSD operations while recording with a
video deck.
