xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
58
DGS-3426:5#config firmware image_id 1 boot_up
Command: config firmware image_id 1 boot_up
Success.
DGS-3426:5#
show firmware information
Purpose Used to display the firmware section information.
Syntax
show firmware information
Description This command is used to display the firmware section information.
Parameters None.
Restrictions None.
Example usage:
To display the current firmware information on the Switch:
DGS-3426P:5#show firmware information
Command: show firmware information
Box ID Version Size(B) Update Time From User
--- -- --------- ------- ------------------- ------------------ -------------
1 *1 2.60.B26 3763691 2009/03/05 10:23:40 10.73.21.1(R)
1 2 (empty)
'*' means boot up firmware
(R) means firmware update through Serial Port(RS232)
(T) means firmware update through TELNET
(S) means firmware update through SNMP
(W) means firmware update through WEB
(SIM) means firmware update through Single IP Management
DGS-3426P:5#
