5
SelecType
5-11
Parallel Menu
These settings control communication between the printer and
the computer when using a parallel interface. Also see page 5-22.
Speed, Bi-D, Buffer Size
Serial Menu
These settings control the serial interface settings. These settings
are necessary for correct communication between the printer and
the computer. Also see page 5-22.
Word Length, Baud Rate, Parity, Stop Bit, DTR, DSR, XOn/XOff,
Buffer Size
AUX* Menu
This setting controls the optional interface settings. Also see page
5-24.
AUX Config**, Get IP Address**, IP Byte**, IP Byte2**, IP
Byte3**, IP Byte4**, SM Byte1**, SM Byte2**, SM Byte3**, SM
Byte4**, GW Byte1**, GW Byte2**, GW Byte3**, GW Byte4**,
NetWare**, AppleTalk**, NetBEUI**, AUX Init**, Buffer Size
* Available only when the Type B interface is installed.
** Available only when the Ethernet Interface Card (C82357
✽
,
C82362
✽
, or C82363
✽
) is installed.
LJ4 Menu
These settings control the fonts and symbol sets when in the LJ4
mode. See page 5-26.
FontSource, Font Number, Pitch, Height, SymSet, Form,
Source SymSet, Dest SymSet, CR Function, LF Function.
