Using the Paper Memory Feature
When you use multi-part forms that overlap, or forms with
labels on them, you can use the paper memory feature for
better print quality. It automatically adjusts the gap between
the print head and the platen based upon the type of paper
set in memory. This should give you better print quality.
c
Caution:
When using overlapping multi-part forms, you may cause a
paper jam if you press the Tear Off, Front/Rear, TOF or
reverse-feeding (bottom)
Micro Feed button. Tear off the
fresh supply at a perforation below the front tractor only and
press the LF/FF Load
button to eject the remaining forms.
Note:
The paper memory feature is available only with the front tractor.
Overlapping multi-part forms
Continuous forms with labels
5-19
L
Peony Rev.C
A5 size Chapter 4
98/01/07 Pass 4
4-22 Using the Printer
