A SERVICE OF

logo

7. Be sure your paper has a clean, straight edge, and then fit
the first five holes in the paper over the sprocket pins as
shown below. The side of the paper that you want to print
on should be facing you. Now close the sprocket covers.
8. Slide the right sprocket so that the paper is straight and has
no wrinkles. Lock the sprocket in place by pushing up the
sprocket lock lever. After you lock the right sprocket, it
may still move slightly; this is normal.
Note:
Be careful not to pull the paper too tightly when adjusting the
right sprocket.
D-1-15-a
sprocket lock lever
D-1-15-B
3
R
Peony Rev.C
A5 size Chapter 3
98/01/07 Pass 4
Paper Handling 3-7