2
Printing on Continuous Paper 2-11
R4C3430
Rev.C
A5 size CHAP2.FM
3/23/99 Pass 0
R
Proof Sign-off:
E.Omori _______
<Kimura> _______
<Editor Name> _______
2. Open the paper guide cover, and tear off the printed
document using the tear-off edge of the printer.
Note:
If your paper’s perforation is not properly aligned with the tear-off
edge, you can adjust the tear-off position using the micro adjust
feature. See “Adjusting the tear-off position” on page 2-43.
c
Caution:
Never use the knob to adjust the tear-off position; this may
damage the printer or cause it to lose the tear-off position.
3. Close the paper guide cover.
When you resume printing, the printer automatically feeds
the paper back to the top-of-form position and starts printing.
To feed continuous paper to the standby position where you can
remove the paper, press the Load/Eject button. (See the Glossary
for an explanation of the standby position.) Then open the
sprocket covers of the tractor and remove the paper.
c
Caution:
Always tear off your printed document before you press the
Load/Eject
button. Reverse feeding several pages at a time may
cause a paper jam.
2-22.eps
2-23.eps
