A SERVICE OF

logo

2
Printing on Continuous Paper 2-25
R4C3430
Rev.C
A5 size CHAP2.FM
3/23/99 Pass 0
R
Proof Sign-off:
E.Omori _______
<Kimura> _______
<Editor Name> _______
7. Make sure your paper has a clean, straight edge. Then open
both sprocket covers.
8. Insert the paper into the front, bottom, or rear paper slot as
described below until it emerges between the platen and the
ribbon guide. Then pull up the paper until the perforation
between the first and second pages is even with the top of the
printer’s ribbon.
Before you load paper in the
front slot, remove the front
paper guide. Then load
paper printable side up.
Load paper in the bottom slot
printable side up (forward).
Before you load paper in the
rear slot, remove the paper
guide base. Then load paper
in the rear slot, printable side
down and attach the paper
guide base.
2-33a.eps