A SERVICE OF

logo

2
Printing on Continuous Paper 2-15
R4C3430
Rev.C
A5 size CHAP2.FM
3/23/99 Pass 0
R
Proof Sign-off:
E.Omori _______
<Kimura> _______
<Editor Name> _______
7. Make sure your paper has a clean, straight edge. Then open
both sprocket covers and fit the first three holes on each side
of the paper, printable side up, over the tractor pins. Then
close the sprocket covers.
8. Slide the right sprocket to remove any slack in the paper; then
lock it in place by pushing the sprocket lock down.
9. Attach the front paper guide by sliding it along the printer’s
mounting slots as shown below. Then close the front paper
guide.
2-17nn.eps
2-16b.eps