62 SPARC Enterprise Mx000 Servers Administration Guide • November 2007
2. Type the poweron command:
where domain_id is the domain you want to power on. Only a user with platadm
or fieldeng privileges can use the -a option to turn on power to all domains.
3. Verify the domain is powered on by opening a console to it, with the console
command.
Refer to “To Access a Domain From the XSCF Console” on page 61.
▼ To Display System Board Status
1. Log in to the XSCF console with platadm, platop,orfieldeng privileges or
domainadm, domainmgr,ordomainop privileges for a specific domain.
2. Type the showboards command:
▼ To Access a Domain From the XSCF Console
1. Log in to the XSCF console with platadm, platop,oruseradm privileges or
domainadm, domainmgr,ordomainop privileges for a specific domain.
2. Type the console command:
where domain_id is the domain you want to access. This command supports both
interactive and read-only connections; the default is a read-write connection.
3. To return to the XSCF console, press the Enter key, then the escape character,
then type a period (.); by default the escape character is the pound sign (#):
XSCF> poweron -d domain_id
XSCF> showboards -a
XSCF> console -d domain_id
% #.
XSCF>
