Chapter 3 Setting Configuration Information
Logical bus address Instance number Driver name
"/pci@83,2000/FJSV,pwga@1" 0 fjgi
"/pci@1f,0/pci@1/FJSV,pgsb@4" 1 fjgi
"/pci@1f,0/pci@1/FJSV,pgtb@1" 2 fjgi
"/pci@83,4000/pci@3/FJSV,p4ta@1" 3 fjgi
"/pci@83,4000/pci@3/FJSV,p4ta@1,1" 4 fjgi
"/pci@83,4000/pci@3/FJSV,p4ta@3 5 fjgi
"/pci@83,4000/pci@3/FJSV,p4ta@3,1 6 fjgi
The logical bus address corresponds to a physical PCI slot number based on the Main
Unit model number. Refer to the "
Appendix D PCI slot number and device name" to
determine the slot number from the logical bus address.
3.4.2 Discernment Of the GigabitEthernet Interface on SPARC
Enterprise
This section explains how to distinguish the FUJITSU PCI GigabitEthernet interface instance
number, interface type, and which slot the card is installed in, on SPARC Enterprise.
1. To determine the instance number, execute the following command.
# prtconf -D | grep fjgi
example) # prtconf -D | grep fjgi
FJSV,e4ta, instance #0 (driver name: fjgi)
FJSV,e4ta, instance #1 (driver name: fjgi)
FJSV,e4ta, instance #2 (driver name: fjgi)
FJSV,e4ta, instance #3 (driver name: fjgi)
FJSV,e2sa, instance #4 (driver name: fjgi)
FJSV,e2sa, instance #5 (driver name: fjgi)
FJSV,e2ta, instance #6 (driver name: fjgi)
FJSV,e2ta, instance #7 (driver name: fjgi)
The instance number is the number displayed in bold above.
The adapter type can also be determined from the prtconf command output.
FJSV,e4ta SE0X7GQ1X (10/100/1000BASE-T * 4ports) card
FJSV,e2sa SE0X7GD2X (1000BASE-SX * 2ports) card
FJSV,e2ta SE0X7GD1X (10/100/1000BASE-T * 2ports) card
2. To determine the slot the GigabitEthernet PCI card is mounted in, execute the
following command.
40
