3
Kollmorgen
S200 Servo Drives
815ph website
: :
226•2222 www.DanaherMotion.com
Increased Machine Throughput and Longer Life
Servo system performance is synonymous with machine throughput. The
S200 family takes servo performance to new heights.
• Industry-leading current loop bandwidth up to 5KHz and velocity loop
bandwidth up to 800Hz means machine throughput can be increased by
as much as 2 to 3 times.
• Robust design including full fault protection,locking connectors and
optical isolation promise greater machine “up-time”.
• Smooth motion, a benefit of sinusoidal current control and high resolution
(24 bit) feedback minimizes harsh torque disturbances that can cut short
the life of mechanical components.
• Both the AC and the DC input drives are equipped with separate control
power input to speed recovery from “E-Stop” conditions.
Reduced Engineering and Support Time
Simplified tuning,friendly Graphical User Interface and shared components
with Stepper products.
• Working in conjunction with the new Smart Feedback Device the drive
automatically sets the current and velocity loop parameters greatly
reducing the need for drive tuning – out of the box “Plug & Play”
• Windows-based Graphical User Interface models the tree format found
in Explorer so learning is quick and easy.
• Easy to debug with full fault diagnostics reduce engineering support time.
• Shares option cards,electrical I/O,and GUI components with the P7000
stepper drive family reducing the time required to learn new products.
Reduced Overall Cost
The S200 design requires fewer components helping to lower the overall
machine cost.
• S200 drive family and the AKM motor family linked with the new “value”
line of cables – dependable Kollmorgen quality now at a lower price.
• Available in a “composite” version that combines the power and feedback
into one cable to further reduce commissioning time.
• Single supplier of AC or DC input brushless servo drives and motors and
stepper drives and motors reduce vendor list management.
The new Graphical User Interface is designed to expedite the set up process.
Although most applications will work with the default parameter that are set
automatically during power up,it may be necessary to adjust some of the user
parameters to fully utilize all of the drive functionality and to optimize servo
loop tuning. If you are familiar with Windows Explorer and tree structures
this GUI is designed to make your life simple – now that is "Easy to Use".
