Page Number - 3
FOR STANDARD AIRMOTOR WITHOUT PUMP STOP
SERVICE ASSEMBLIES & KITS
To reduce down-time and take advantage of the modular design of the airmotor, Henkel recommends using the following
Service Assemblies for repair of the airmotor. After removal, the faulty assembly can then be repaired using the
corresponding Soft Parts Kit.
1. Pilot Bar Subassembly
P/N 988747
2. Soft Parts Kit P/N 988746 for repair of Pilot Bar
Subassemblies listed above. (Includes all necessary
“O”-rings.)
3. Relay Valve. P/N 988748
4. Air Signal Valve P/N 988749
5. Cylinder Tube Soft Parts Kit
( Includes all “O”-rings, piston seal. etc.)
P/N 988753 (6” Airmotor)
P/N 988752 (4-1/4” Airmotor)
6. Power Valve Subassembly
P/N AC244806 (6” Airmotor)
P/N AC244808 (4-1/4” Airmotor)
7. Soft Parts Kit P/N 988751 for repair of Power Valve
Subassemblies listed above.
8. Power Valve Spool & Body P/N 988750
IMPORTANT: When replacing soft parts, replace all parts
included in the soft parts kit.
