152
Software for the D1x (continued)
CONNECTING TO A COMPUTER—SOFTWARE FOR THE D1x
Nikon Capture 2
Nikon Capture 2 can be used to control the camera when it is connected to a
computer, and also to edit photographs. You can also simplify studio photography by
recording photographs directly to the computer’s hard disk, without first storing
them on the memory card. Nikon Capture 2 also supports batch processing and
editing of all images created with the camera, including RAW data. See the Nikon
Capture 2 manual for details
System Requirements for Nikon Capture
Windows
1 Only pre-installed versions are supported.
2 Depending on the number of images captured, more may be required.
3 Required if the camera is to be connected to the computer. The camera may not func-
tion as expected when connected to an IEEE 1394 hub. For information on IEEE 1394
expansion boards or cards that have been tested and approved for use with your Nikon
digital camera, see the web-sites listed below.
Software specifications are subject to change without notice. For the latest information and
software upgrades, visit the following web-sites:
• For the U.S.A.: http://www.nikonusa.com/
• For Europe: http://www.nikon-euro.com/
• For Asia, Oceania, the Middle East, and Africa: http://www.nikon-asia.com/
OS
Miscellaneous
Video
resolution
Hard disk
space
CPU
RAM
Windows 98 Second Edition (SE)
1
, Windows 2000
1
, Windows Millen-
nium Edition
1
• CD-ROM drive required for installation
• OHCI-compliant IEEE 1394 interface
3
640 × 480 pixels with 16–bit color (High Color) (800 × 600 pixels or
greater with 24-bit color [True Color] recommended)
40 MB free while Nikon Capture is running (200MB or more recom-
mended)
2
Pentium II, Celeron, or better
64 MB (128 MB or more recommended)
2
