Operating Instructions
102
2.18 Buffering or Transferring Images by Motion
Detection Signal
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Notes
• A change due to light or wind may detect motions mistakenly.
• Motion detection level is changed depending on resolution, image quality, and
object situation. Confirm the level by performing motion detection recording.
• Enabling Motion Detection delays the frame rate of this product.
• Objects moving fast may not be detected.
• Motion Detection may not work in the dark.
1. Click [Trigger] on the Setup page.
2. Click [No.] to enable buffer/transfer.
3. Check [Enable Image Buffer/Transfer], select [Motion Detection] for trigger,
and click [Next>].
Notes
• If you click [Save], all buffered images on the SD memory card are deleted.
• Click [Delete Buffered Images] to delete this buffered images.
• Click [Save] to save the settings.
• Clicking [Cancel] takes you back to the Trigger page without saving
changes.
