Operating Instructions
40
Default Gateway
*1
(Static/DHCP Only)
• If you have the assigned Default Gateway address by your
ISP or network administrator, enter it in this data field.
• Set 4 digits (0—255) and 3 periods such as
"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
not available.
DNS Server
Address
*1
(Static/DHCP Only)
• DNS server address is required in the following conditions.
– Transferring images by E-mail or FTP
– Setting products by their host names on the Multi-
Camera Setup page
– Using the DynamicDNS service
– Using the alarm log notification
• If you have the assigned DNS server addresses by your
ISP or network administrator, enter them in this data field.
They usually have two addresses.
• Set 4 digits (0—255) and 3 periods such as
"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
not available.
Max. Bandwidth
Usage
• The bandwidth can be restricted.
• Select the maximum bandwidth usage from [Unlimited] to
[0.1 Mbps].
• This setting is valid in both IPv4/IPv6.
Note
Set the maximum bandwidth usage seeing the following
file sizes. These are examples for a JPEG file with a
standard image quality. File sizes may change depending
on the image quality or how bright the object is.
160 × 120 pixels: About 3.5 KB (28 Kbit)
320 × 240 pixels: About 10 KB (80 Kbit)
640 × 480 pixels: About 18 KB (144 Kbit)
Connection Type • Select [Auto Negotiation] normally. If you cannot access
this product, see page
7 of the Troubleshooting on the
Setup CD-ROM.
• This setting is valid in both IPv4/IPv6.
*1
If you automatically obtain the IP address from the DHCP server, you do not need to set it.
Setting Description
