Operating Instructions
12
1.2 Accessing this Product
1. Start up the web browser on your PC.
2. Enter "http://IPv4 Address (or URL):Port Number" on the address bar, and
press [Enter] on the keyboard.
• When port number is 80 (default), you do not need to enter port number.
See page
39 for details about port number.
• For IPv6 connection, see page 14 and page 15, and prepare the
requirements. Enter the "http://(IPv6-registered URL):Port Number" on
the address bar.
• If the image is not displayed, see page 7 to page 12 of the Troubleshooting
on the Setup CD-ROM.
3. The Enter Network Password window is displayed, and enter the user name
and password that were set, and click [OK].
Note
When [Permit access from guest users] is set on the Security: Administrator
page (see page
74), authentication window will not be displayed.
4. Click the following tabs to display each page.
E.g. http://192.168.0.253:50000 (in IPv4)
http:// .viewnetcam.com:50000 (in IPv6)
A To Single Camera page (page 16) B To Multi-Camera page (page 27)
C To Buffered Image page (page 29) D To Setup page (page 34)
E To Maintenance page (page 132) F To Support page (page 141)
GTo log in to this product (page 77)
A B C D E F G
Select a language.
Displays IPv4, IPv6
or IPsec connection.
Version Number
