28
WEP Key Size
Select the desired option:
· 64 Bit - Keys are 10 Hex (5 ASCII) characters.
· 128 Bit - Keys are 26 Hex (13 ASCII) characters.
· 152 Bit - Keys are 32 Hex (16 ASCII) characters.
Dynamic WEP Key
Click this if you want the WEP keys to be automatically
generated.
· The key exchange will be negotiated. The most widely
supported protocol is EAP-TLS.
· The following Key Exchange setting determines how
often the keys are changed.
· Both Dynamic and Static keys can be used simultane-
ously, allowing clients using either method to use the
WAP-4060PE.
Key Exchange
This setting if only available if using Dynamic WEP Keys. If
you want the Dynamic WEP keys to be updated regularly,
enable this and enter the desired lifetime (in minutes).
Static WEP Key
(EAP-MD5)
Enable this if some wireless clients use a fixed (static)
WEP key, using EAP-MD5.
Note: both Dynamic and Static keys can be used simulta-
neously, allowing clients using either method to use the
WAP-4060PE.
WEP Key Enter the WEP key according to the WEP Key Size set-
ting above. Wireless stations must use the same key.
WEP Key Index
Select the desired index value. Wireless stations must use
the same key index.
Radius Accounting
Enable this if you want this WAP-4060PE to send account-
ing data to the Radius Server.
If enabled, the port used by your Radius Server must be
entered in the Radius Accounting Port field.
Update Report
every ...
If Radius accounting is enabled, you can enable this and
enter the desired update interval. This WAP-4060PE will
then send updates according to the specified time period.
Radius MAC
Authentication
The current status is displayed.
Click the Configure button to configure this feature if
required.
UAM
The current status is displayed.
Click the Configure button to configure this feature if
required.
