A SERVICE OF

logo

36 - English
System Setup
4
Select the sub menu(Digital Output, DTS,
Dynamic Compression) using the
…†
buttons,
then press the ENTER or button.
Digital Output
PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM if your amplifier system is stereo and/or
Dolby Prologic.
Bitstream : Outputs Bitstream (original format) such as
Dolby or DTS.
Select Bitstream if your amplifier system has multi
channel digital audio surround decoding (Dolby Digital
and/or DTS).
DTS
On : Outputs DTS bitstream. (via Digital Audio
Output)
Select DTS when connecting to a digital amp
with DTS decoder.
Off : Doesn’t output DTS bitstream (original format).
When DTS soundtrack is played, sound is not output
from Analog Audio Output.
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
On : When movie soundtracks are played at low volume
or from small speakers, the system can apply
appropriate compression to make low-level content more
intelligible and prevent dramatic passages from getting
too loud.
Off : You can enjoy the movie with standard Dynamic
Range.
5
Select the desired item(PCM, Bitstream, DTS-
Off, DTS-On, Dynamic Compression-Off or
Dynamic Compression-On) using the
…†
buttons
Then press the ENTER or button.
Select the item that matches the audio
connection you’ve selected on pages
21~23(Method 1, 2 and 3).
Press the RETURN or œ button to return to
the previous menu.
Press the MENU button to exit the menu.
NOTE
Audio
DVD-Recorder
No Disc
Timer Rec.
Setup
Digital Output : PCM
DTS : Off
Dynamic Compression: On
Audio
DVD-Recorder
No Disc
Timer Rec.
Setup
Digital Output : PCM
DTS : Off
Dynamic Compression:
On
PCM
Bitstream
Audio
DVD-Recorder
No Disc
Timer Rec.
Setup
Digital Output : PCM
DTS : Off
Dynamic Compression:
On
Off
On
Audio
DVD-Recorder
No Disc
Timer Rec.
Setup
Digital Output : PCM
DTS : Off
Dynamic Compression
On
Off
On
RETURNENTERMOVE EXIT
RETURNENTERMOVE EXIT
RETURNENTERMOVE EXIT
RETURNENTERMOVE EXIT
01050A-R145-XAA-ENG-31-47 2006.4.11 6:3 PM Page 36