
ENGLISH
ESPAÑOL
3434
Basic Recording Grabación básica
Making your First Recording Primera grabación
1. Connect a power source to the
Camcorder. ➥page 19
(A Battery pack or a AC Power
adapter)
Insert a cassette. ➥page 32
2. Remove the Lens Cover.
3. Set the [Power] switch to
[CAMERA].
■
Open the LCD Screen.
■
Set the [Mode] switch to
[TAPE].
Make sure that <STBY> is
displayed.
■
If the write protection tab
of the cassette is open (set
to save), <STOP> and
<Protection!> will be
displayed. Release the write
protection tab to record.
■
Make sure the image you want to record appears on the LCD
Screen or Viewfinder.
■
Make sure the Battery Level indicates that there is enough
remaining power for your expected recording time.
■
You can select a Record Mode of your choice. ➥page 43, 44, 45
4. To start recording, press the [Start/Stop] button.
■
<REC●> is displayed on the LCD Screen.
To stop recording, press the [Start/Stop] button
again.
■
<STBY> is displayed on the LCD Screen.
[ Note ]
Detach the Battery Pack when you are finished recording
to prevent unnecessary battery power consumption.
1. Conecte a la cámara a una
fuente de alimentación.
➥pág. 19
(Una batería o un adaptador
de CA.) Introduzca un
casete. ➥pág. 32
2. Retire la tapa del objetivo.
3. Coloque el interruptor
[Power] en [CAMERA].
■
Abra la pantalla LCD.
■
Coloque el interruptor
[Mode] en [TAPE].
Asegúrese de que
aparece <STBY>.
■
Si la pestaña de
protección del casete
está abierta (protegida),
aparecerá <STOP> y
<Protection!>
(¡Protección!). Libere la
pestaña de protección
contra escritura para
grabar.
■
Asegúrese de que la imagen que desea grabar
aparezca en la pantalla LCD o en el visor.
■
Asegúrese de que el nivel de la batería indique
que tiene suficiente energía para grabar durante
el tiempo deseado.
■
Puede seleccionar el modo de grabación que
desee. ➥pages 43, 44, 45
4. Para iniciar la grabación, pulse el botón
[Iniciar/Detener].
■
Aparece <REC●> en la pantalla LCD.
Para detener la grabación, pulse el botón
[Iniciar/Detener] de nuevo.
■
Aparece <STBY> en la pantalla LCD.
[ Nota ]
Desconecte la batería al terminar de grabar para evitar un consumo
innecesario de la batería.
4
3
2
√
√
1
60min
0:00:10
SP
REC
●
√
4
01040F VPD963 UK+ESP~042 9/21/06 2:36 PM Page 34