ENGLISH
4444
✤ The WindCut Plus function works in both <Camera> and <Player> (Audio dubbing) modes. ➥page 19
✤ Use the WindCut Plus when recording in windy places such as the beach or near buildings.
✤ The WindCut Plus function minimizes wind noise or other noise while recording.
- When the WindCut Plus is on, some low pitched tones are eliminated along with the sound of the wind.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Press the [MENU] button.
4. Move the [Zoom] lever up or down to select <Record>, then press the [OK] button.
5. Move the [Zoom] lever up or down to select <WindCut Plus>, then press the [OK]
button.
6. To activate the WindCut Plus function, move the [Zoom] lever up or down to select
<On>
or <Auto>
then press the [OK]
button.■
<On>: It removes the low pitched wind noise.
■
<Auto>: It minimizes the wind noise while preserving the human voice.
7. To exit, press the [MENU] button.
■
WindCut Plus (<On> or <Auto> ) icon is displayed.
[ Notes ]
■
Make sure WindCut Plus is set to off when you want the microphone to be as sensitive
as possible.
■
WindCut Plus function is not available in USB Streaming mode.
Advanced Recording
Cutting Off Wind Noise (WindCut Plus)
Move Select Exit
MENUOKZOOM
Camera Mode
√Record
Rec Mode
Audio Mode
WindCut Plus
Real Stereo
√SP
√12Bit
√Off
√Off
Move Select Exit
MENUOKZOOM
Off
On
Auto
4
6
60min
0:00:10
SP
STBY
7
œ
Camera Mode
Back
Rec Mode
Audio Mode
WindCut Plus
Real Stereo
01040E VPD963 UK~066 3/20/06 12:32 PM Page 44
