Additional Information
109
GB
Center
Speaker system Closed, magnetically
shielded
Speaker unit Woofer: 70 × 120 mm
dia. cone type
Tweeter: 25 mm dome
type
Rated impedance 4.0 ohms
Dimensions (approx.) 545 × 105 × 35 mm
(w/h/d)
545 × 116 × 60 mm
(w/h/d) with stand
Mass (approx.) 1.9 kg
2.1 kg with stand
Subwoofer
Speaker system Bass reflex, magnetically
shielded
Speaker unit 150 mm cone type
Rated impedance 1.5 ohms
Dimensions (approx.) 188 × 573 × 318 mm
(w/h/d)
Mass (approx.) 14.5 kg
Power requirements 220 – 240 V AC, 50/60 Hz
Power consumption 130 W
0.3 W (at the Power Saving
mode)
Control unit
Dimensions (approx.) 570 × 168 × 56 mm
(w/h/d)
570 × 188 × 99 mm
(w/h/d) with stand
Mass (approx.) 4.2 kg
4.7 kg with stand
AC adaptor
Power requirements 220 – 240 V AC, 50/60 Hz
Power consumption 45 W
Dimensions (approx.) 219 × 44 × 82 mm
(w/h/d)
Mass (approx.) 0.7 kg
Design and specifications are subject to change
without notice.
Unpacking
• Control unit (1)
• Speakers (5)
• Subwoofer (1)
• AC adaptor (1)
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Speaker cords (5 m × 2, 3.5 m × 1, 10 m × 1)
• Remote Commander (remote) (1)
• R6 (size AA) batteries (2)
• Calibration mic (1)
•Posts (4)
• Bases (4)
• Speaker adaptors (4)
• Speaker adaptor covers (4)
• Cord clamp (1)
• Adjuster (1)
• Center speaker base (1)
• Control unit stand (1)
• Control unit stand cover (1)
• Screws (24)
• IR transmitter (1)*
• IR receiver (1)**
• IR receiver stand (1)**
• Operating Instructions
• Quick Start Guide (card) (1)
* The IR receiver cord and IR transmitter are for this
system only. You cannot use a commercially
available extension cord.
**Used when the IR receiver of the surround speaker
(L) cannot receive infrared ray because of the
position. For details, see “Using the IR Receiver”
(page 32).
