A SERVICE OF

logo

Open as PDF
next previous
16
GB
Getting Started – BASIC –
2 Remove the post cover, slide the speaker adaptor onto the post, adjust the height of the
speaker adapter, and secure it with the screws. (for all speakers)
Note
• Keep the post cover handy, so you can replace it later.
3 (For the surround speaker (L))
Connect the connector of the speaker cord to the speaker.
Screws
Speaker
adaptor
,
Post
Hook
(upper part)
,
Post cover
Screws
Loosen (but do
not remove) the
screws before
attaching.
About the height of the speaker
The height of the speaker top is A + 390 mm.
(A: Between the top of the speaker adaptor and top of the
base.)
• Lowest position: A = 570 mm, Speaker top = 960 mm
• Highest position: A = 910 mm, Speaker top = 1,300 mm
Rear of the surround speaker (L)
Connector (gray)
Speaker cord