A SERVICE OF

logo

3-108 Sun Fire B1600 Blade System Chassis Switch Administration Guide June 2003
3.4.3.1 Dynamically Configuring an Aggregated Link with LACP
Web Interface: Dynamic Aggregated Links (LACP)
1. Click Up Links/Down Links Link Aggregation.
2. Locate the required port in the Link Aggregation table.
3. Click Enable LACP or Disable LACP.
Note The action buttons take immediate effect. To avoid creating a loop in the
network, be sure you enable LACP before connecting the ports, and also disconnect
the ports before disabling LACP.
FIGURE 3-35 The Uplink Link Aggregation Window