23
Note Dialog
)
Note:
Limited by local law regulations, version for North America does not have region selection
option.
¾ Channel - This field determines which operating frequency will be used. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
¾ Mode - Select the desired wireless mode. The options are:
• 54Mbps (802.11g) - Both 802.11g and 802.11b wireless stations can connect to the
router.
• 11Mbps (802.11b) - Only 802.11b wireless stations can connect to the router.
¾ Region - Specifies the region where the wireless function of the AP can be used. Select your
region from the drop-down list. If your country or region is not listed, please contact your local
government agency for assistance.
Be sure to click the Save button to save your settings on this page.
)
Note:
The device will reboot automatically after you click the Save button.
4.6.2 Wireless Mode
Selecting Wireless > Wireless Mode will enable you to configure the wireless mode for your
device on the page as shown in Figure 4-12.
