Filter
Top Products
19
To Enable the Tilt Switch
1. Press and hold
(mute) and Menu
until the backlighting blinks twice, then
release.
2. Press
.
The backlighting ashes four times.
The tilt switch is now activated: the
backlighting will come on when you
move the remote.
Resetting Your Remote
To reset all the functions of the remote
control to the factory defaults (the
original, out-of-the-box settings), follow
these steps:
1. Press and hold the
(mute) and
Menu keys at the same time until the
backlighting ashes twice, then release
both keys.
2. Press
.
The MEDIA key ashes 4 times to
conrm that your remote has been
reset to factory default settings.