Filter
Top Products
5
that the device you want to control is
switched on (not in standby).
2. Press the device key for the device you
want to control (TV for a television, AUD
for an audio receiver, or MEDIA for a
docking station) to select the device.
3. Press and hold (mute) and Menu until
the device key (e.g., TV) blinks twice (it
will blink once then twice).
4. Use the transport keys to enter your
5-digit code:
For example, to enter 12345, press
5. The device key blinks twice.
6. Now, aim the remote at the device you
want to control and press
(power).
If your device switches off, the remote
should be ready to operate your device.
1
2
34
5
continuesonnextpage...