ENGLISH
13
1
2
3
Setting the VCR channels
Before setting Auto Channel Memory, this VCR can receive
all channels in your area by pressing the CHANNEL N or
M button repeatedly. After Auto Channel Memory has
been set, you can skip the channels which are not preset
with the CHANNEL N or M button.
Before starting
• Set the VCR/CATV/TV selector to VCR.
• Make sure the VCR channel is not selected “L” (in the
display window or “LINE” on the TV screen).
Press MENU.
Press SET/TRACKING + or – to select CH SET
UP, then press ENTER.
Press ENTER to select TV or CATV.
TV : the program from UHF/VHF antenna
CATV : the CATV according to the connections to the
antenna connector
MENU
SET/TRACKING
+/–
ENTER
VCR/CATV/TV
Setting the clock (continued)
Setting the standard time according
to your area
When you move to a different area of the country, you can
adjust the clock only by selecting your new area.
This setting is only possible when setting AUTO CLOCK to
ON.
Press MENU.
Press SET/TRACKING + or – to select SYSTEM SET
UP, then press ENTER.
Press SET/TRACKING + or – to select STANDARD
TIME, then press ENTER.
Press SET/TRACKING + or – to select your area,
then press ENTER.
Normally the AUTO setting is sufficient.
Press MENU twice to return to the normal screen.
1
2
3
4
5
TIMER REC SET
CH SET UP
VCR SET UP
NO NOISE BACKGROUND
ON OFF
SYSTEM SET UP
MENU
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
SYSTEM SET UP
TIMER REC SET
CH SET UP
VCR SET UP
NO NOISE BACKGROUND
ON OFF
SYSTEM SET UP
MENU
TV CATV
AUTO CH MEMORY
ADD/DELETE
GUIDE CH SET
CH SET UP