Filter
Top Products
16
CONNECTIONS (CONTINUED)
AUDIO
OUT
VIDEO
OUT
S-VIDEO
DIGITAL OUT
OUT
COAXIAL
L
R
NTSC
PAL AUTO
OPTICAL
DIGITAL
OUT
NOTE
When the picture noise appears while copy-protected DVDs
are played, connect the unit directly to a TV set. Do not connect
through a VCR, TV/VCR or AV selector.
F Connecting to a TV set and an AV amplifier with the Dolby Pro Logic Surround system
When your TV set is equipped with an S-video input terminal, see page 17.
TV set
Front
speaker (L)
Front speaker
(R)
Rear of the unit
Centre speaker
Surround speaker (R)Surround speaker (L)
white
red
Audio cord (supplied)
to an audio input jacks
(Left/ white, Right/ red)
to AUDIO OUT
L (white)/ R (red) jacks
Set the setup menu correctly after connecting!
According to the audio equipment and TV set to which
the unit is connected, set the “Digital Audio Output” and
“TV Aspect” of the setup menu correctly referring to the
following below.
See “CHANGING SETUP VALUE” on page 39 in detail.
Digital Audio Output
DOLBY DIGITAL/PCM
TV Aspect
When your TV set is a conventional-screen size TV:
4:3 Letter box
When your TV set is a wide-screen size TV:
16:9 Wide
to an AC power socket
(AC 230 V, 50 Hz)
Amplifier equipped with
Dolby Pro Logic Surround
21 pin scart cable (not supplied)
to 21 pin scart
connector