Filter
Top Products
13
SAP
CH 24
STEREO
TV
LOCAL
8. AUDIO Key
Use the AUDIO Key to change the audio setting for TV and CABLE..
Press AUDIO key [A] to display the current Audio status (blinking). Pressing the key
again will cycle through the three settings (STEREO —> SAP —> MONO). After 8
seconds or when any other key is pressed, the OSD disappears and any change made is
set.
OPERATION - TV Tuner Control Functions
9. DISPLAY Key
The DISPLAY Key [A] displays the current TV and AV Controller status for TCS-
V430A.
After 8 seconds or when any other key is pressed, the OSD disappears.
This key has two functions as follows:
• Press and release [A]: Display current TV status [B]
OSD gives the CH Audio status, TCS-V430A AUDIO mode, BAND, A.PGM and
Channel for TV.
STEREO
SAP
MONO
AUDIO SELECTION
A
B
A
TV Audio
CH
AUDIO
Mode
A.PGM
MEMORY
B
• Press and Hold [A]: Display current AV Controller status
OSD will display the monitor number and currently assigned AV input source on all
monitors.
Monitor 1 Monitor 2 Monitor 3
MONITOR1: TV MONITOR2: DVD MONITOR3: AUX
BAND