Filter
Top Products
Architect & Engineer Specification
8200-2608-01 B0 VideoEdge
®
Network Video Recorder 10 of 20
AMERICAN DYNAMICS
V
IDEOEDGE
TM
NETWORK VIDEO RECORDER
c. Maximum Video Record Rate (FPS)
d. Pre-Alarm Duration – (Selectable from 30 to 120 seconds)
e. Post-Alarm Duration – (Selectable from 30 to 120 seconds)
Note: The video codec will determine the ability to setup different fetch and
record frame rates, plus pre and post intervals.
34. The Network Video Recorder software shall support ability to quickly locate
recorded video using standard search parameters to filter through hours and
days of video to find only the essential events. Users shall search on recorded
video using video or snapshot mode:
a. Camera Name – (Corresponding camera slot number)
b. Day – (Date of the recording)
c. From - (Start time)
d. To – (End time)
35. The Network Video Recorder software shall support a one, two, four or eight
live camera views per monitor and with the ability to view full screen using
the THIN CLIENT (browser) with appropriate drivers. The RICH CLIENT
(Vx Client) provides multiple camera view templates for viewing cameras
from multiple Network Video Recorders.
36. The Network Video Recorder software shall support server-based motion
detection for the most recent supported devices and device-based motion
detection for applicable legacy supported devices. The server-based motion
detection shall provide a grid area that can select/deselect cells to designate
the areas of interest to monitor for motion detection along with adjustable
trigger parameters. The latest list of supported devices shall be available on
the manufacturer's web site.
37. The Network Video Recorder software shall support specific IP based
acoustic sensor devices. It shall trigger alert-based recording and support up
to 10 actions. The latest list of supported devices shall be available on the
manufacturer's web site.
38. The Network Video Recorder software shall support dry contacts for specific
IP camera devices. It shall trigger alert-based recording and support up to 10
actions. The latest list of supported devices shall be available on the
manufacturer's web site.
39. The Network Video Recorder software shall support audio recording for
specific IP camera devices. MPEG4 with AAC shall be the initial codec that
will support audio and video. The list of supported devices shall be available
on the manufacturer's web site.
40. The Network Video Recorder software shall support a recording scheduler
for all managed camera devices in sixty minute increments.
a. Camera Selection