American Dynamics ADNSNVR-CL1 DVR User Manual


 
Architect & Engineer Specification
8200-2608-01 B0 VideoEdge
®
Network Video Recorder 2 of 20
AMERICAN DYNAMICS
V
IDEOEDGE
TM
NETWORK VIDEO RECORDER
PART 1.05 – SUBMITTALS, and must be obtained within the time frames
outlined.
1.04 SYSTEM DESCRIPTION
A. The Network Video Recorder shall be turn-key, software-based open platform
solution that functions as an appliance server and operates on hardened and
embedded Linux® operating system. It shall be available as software-only or as
a bundled server solution. The unit shall combine multiplexing, sensor/motion
detection, video, and audio. The unit must operate in server-client architecture as
a network appliance and simultaneously support viewing, recording, and
playback of video. The Network Video Recorder shall be TCP/IP and HTTP
compliant, enabling administrators to provide better corporate deployment, and
provide a standard format for server management.
1.05 SUBMITTALS
A. General: Submittals shall be made in accordance with the Conditions of the
Contract and Submittal Procedures Section.
B. Shop Drawings and Schematics: Shall depict the Network Video Recorder in
final proposed “as built” configuration. The following must be provided:
1. Connection diagrams for interfacing equipment.
2. List of connected equipment.
3. Locations for all major equipment components to be installed under this
specification.
C. Product Data: The following shall be provided:
1. Technical data sheets.
2. A complete set of instruction manuals.
D. Quality Assurance Submittals: The following shall be submitted:
1. Checkout Report: The Contractor shall provide the Owner with a
checkout report for each Network Video Recorder. The report shall
include:
a. A complete list of every device.
b. The date it was tested, and by whom.
c. If retested, the date it was retested, and by whom.
d. The final test report shall indicate that every device was tested
successfully.
2. Manufacturer’s Instructions: The Contractor shall deliver TBD sets of
System Operation and Maintenance Manuals (if available) to the Owner.