Filter
Top Products
User’s Manual
10
Connecting Short-term Device
If you plan to install any short-term devices to the AVE DR16X / AVE DR8X
series and use them as part of the unit system, such as USB CD-RW, USB
Hard Disk Drive, etc. Make sure connecting those devices only during the unit
is powered up. Because AVE DR16X / AVE DR8X series unit can recognize
the external devices only after the power-up process is done completely.
2.4 Rear Panel Connections
There are various connectors on the rear panel used for AVE DR16X / AVE
DR8X series installations. The following figure shows the connectors by name;
and followed by the detailed description of each connector.
Main Monitor (S-Video / BNC)
Both S-Video and BNC output connectors are offered for connecting to a main
monitor. The main monitor displays live image and playback recorded video in
full-screen or split-window format.
Call Monitor (BNC)
The call monitor is used to display full screen video of all installed cameras in
sequence. The BNC call monitor connector allows user to connect the AVE
DR16X / AVE DR8X series unit with an optional call monitor.
Video Input
16 BNC connectors are offered for video input streams from installed cameras.
The number of connectors is equal to the number of channels.