Filter
Top Products
User’s Manual
39
4.6.1 Dome Connection
Follow the steps to install dome camera.
• See OSD Menu Setup Guide, Section Rear Panel Connections for RS-485
port pin definition.
• Refer to the following figure. Connect the R+, R- terminals on the dome
camera to the D+, D- terminals on the RS-485 port by RS-485 cable
respectively.
4.6.2 Dome Protocol Setup
The Dome Protocol item lists the available dome protocols for communicating
with dome cameras connected to the AVE DR16X / AVE DR8X series. From
the Main menu, select <Camera Setup> and press ENTER. The following
menu is displayed.
Camera Setup
1. Camera Select
2. Dome Protocol
3. Dome ID
4. Camera Title
5. Covert
6. Termination
7. Brightness
8. Contrast
9. Saturation
10. Hue
11. Audio Association
CH1
None
0
NO
NO
0
0
0
0
Both