Filter
Top Products
21
Picture-in-Picture Menu
How to display menus
PIP Mode
Your LCD TV can display the main signal and an
auxillary signal input simultaneously.
The PIP signal appears in a small box within the
screen when the PIP feature’s activated.
Refer to the chart at right as to the inputs allowed
using PIP when viewing your main signal.
To Activate PIP
While your main signal is on, press PIP on the
remote control.
As an example, we will use TV as your main
signal. While your main signal (TV) is displayed,
press PIP from the remote. An OSD will appear
with the source input options available to display
in the PIP box.
Press “PIP-Input” on remote to select an input
option.
Press “Swap” to change signal sources.
Press “PIP-SIZE” to change the size of your PIP
image.
Press “PIP-POS” to reposition PIP image in
other corners of your display.
TV
AV
SVIDEO
YPbPr
1/2
VGA
DVI
TV AV SV YPbPr VGA DVI
PIP Modes That Function Together are
Checked below:
IE: While in TV mode your PIP will display
those signals connected to YPbPr, VGA
and DVI only.
In order to use the PIP feature you must take note of the input
selected as the main (larger) picture. You should familiarize your-
self with this page as not all inputs connected to the television are
available using the PIP feature.
Main
Signal
Main Signal
PIP Signal
PIP Signal