Filter
Top Products
20
BASIC FUNCTIONS (continued)
General Operation
2.To select a channel
1.To control volume
Press the - VOL + buttons to decrease or increase the vol-
ume.
Volume 20
Mute
the CH button - Press the CH + button
While adjusting volume, press the F and - VOL + buttons at the
same time and the volume decreases or increases by 4 levels.
During normal play, press the MUTE button to eliminate the
sound until you press the VOL + or MUTE button again.
Press the CH + button to choose higher-num-
bered channels and the -CH button to choose
lower-numbered channels. For example, if the
current channel number is 7 (Provided that
Channel 6,8 are set to Add).
Using the Channel Number buttons
To select a one -digit channel number
Press the 0 button, then press another Channel Number but-
ton (except 100+) to select a desired number.
To select a two -digit channel number
Enter a first-digit, then second-digit.
To select channel number between 100 and 125 in the
Cable mode
Press the 100+ button so that “1_ _ ” appear on the screen,
then enter the next digit one and two.
Press the RECALL button and the TV will directly skip back to
the previous channel. For example, you are watching Channel
3 and previously you watched Channel 15.If you press the
RECALL button, the channel number will skip directly from
Channel 3 to Channel 15. Press the RECALL button repeat-
edly to change between these two channels.
Note:
In the Video mode, pressing the RECALL button can return
to the TV mode.
6
0
1 18
12
1
15
124
9
78
3