Filter
Top Products
21
BASIC FUNCTIONS (continued)
General Operation (continued)
1 Press the SCAN button so that “ Scan Off ” appear on the screen.
4)
SCAN
Note:
2 Press the SCAN button again so that “Scan On ”appear on the
screen and the TV begins to scan from the current channel.
During scanning, pressing any button can interrupt scanning.
3. CCD/Text switch
4. TV/Video selection
Press the CC button to display the current Closed Captions/Text mode on the screen.Press
the button again to display “CCD/Text Off” on the screen
Notes:
ln the Video mode, pressing the CH - / + buttons can return to the TV mode.
5. Stereo seIection
In the TV mode, the TV can automaticatly identify MTS stereo modes among Mono,
Stereo, SAP and SAP.
Press the STEREO button firstIy to dispIay the auto - identified MTS mode on the screen.
Press the button again before the OSD disappears to shift to other MTS mode as follows.
With Stereo/SAP signal received, you may seIect one of the SAP, Stereo and Mono
modes cyclically.
With Stereo signaI received, you may select one of the Stereo and Mono modes cycli-
cally.
With Mono signal received, only Mono mode can be avaiIable.
CC
VIDEO
STEREO
Scan On
Press the VIDEO button, and the screen display changes in circular way:
Video1 Video2 Video3 S VHS Channel Number
To receive signaIs from external equipment, pIease be sure to select a corresponding Video mode.
SHIFT