Atek electronic Tote Universal Remote User Manual


 
Features & Operation
Tote-Remote User’s Manual, Page 14
reprogram the receivers to work with the ID codes of their original
remote controls.
Using multiple Tote-Remotes to control one computer
Since a receiver can only operate on one ID code at a time, all the
remote controls would have to be set to the same ID code in order to
control one receiver. Although you can randomly reset your Tote-
Remote’s ID code (see “Reset ID Code” instructions under
“ADVANCED BUTTON FUNCTIONS” section above), there is no
way to set the ID code of a Tote-Remote to a specific ID code.
Therefore, the only way you could use two (or more) remote controls
with one receiver is if by unlikely chance you bought two remote
controls that were set in the factory to the same ID code or if by chance
you were able to randomly reset one remote control on one remote
control to the same ID code as another remote control. Since there are
many different ID codes, the chances of being able to randomly reset
one remote control’s ID code to match the ID code of another remote
control are very slim.