Filter
Top Products
1. Sliding the screen release lock forward will unlock the LCD
screen and it will drop down slightly. Pivot the screen downward
until a comfortable viewing angle is reached. The internal hinge
friction will hold the screen in position while the system is in use.
2. Pressing the power button on the unit or the remote control will
turn the system on or off alternately. When in use the internal
backlighting will illuminate the controls.
3. After the unit has been turned on load a disc into the disc slot
(label side up). Adjust the viewing angle by pivoting the screen to
optimize the picture quality.
4. Remember to turn the unit off and pivot the LCD to the locked
position when not in use.
The lights integrated into the JE17FDTV are controlled by a three
position slide switch. Sliding the switch to the on position will turn the
lights on. The off position will prevent the lights from turning on at all
times, and the auto position will allow the lights to turn on and off with
the vehicle’s interior lighting. Refer to the Installation Manual for the
wire connections. Do not leave the vehicle unattended with the
dome light switch in the on position, as this could result in a
discharged battery.
The JE17FDTV incorporates two Infrared sensors which relay
signals from the remote control to allow the unit to be controlled
simply by pointing its remote control at the remote sensor eye. The
repeater function allows control of auxiliary equipment such as an
Audiovox Video Cassette Player. The infrared sensor can relay
signals from most manufacturer’s remote controls to its respective
component connected to the AV 1 input. In this case you must use
the remote control supplied with the component.
TURNING THE JE17FDTV ON OR OFF
OVERHEAD DOME LIGHTS
REMOTE SENSOR
Dome Light
Switch
Remote Sensor
Eye
14