Filter
Top Products
Antennas with two sets of leads
You might have two sets of leads from your antenna system, especially if you have one
antenna for VHF signals and one for UHF signals.
If your antenna system has both a coaxial lead and twin 300Ω leads, you must obtain a
combiner (available at your local electronics store). Press or screw the coaxial lead onto the
combiner; place the twin leads underneath the screws on the combiner and tighten the
screws. Press the cable from the combiner onto the antenna termnial on the back of your
TV.
If your antenna system has two sets of twin 300Ω leads, you must obtain a combiner
(available at your local electronics store). Place one set of twin leads underneath the
screws on the combiner and tighten the screws. Do the same with the other set of twin
leads. Press the cable from the combiner onto the antenna terminal on the back of your TV.
Connecting a cable system
If your cable set-up is not described below, please contact your cable company for more
information.
8- Chapter 2: Connecting an Antenna or Cable to your TV
If your cable system does not require the use of a
cable box, simply press or screw the incoming
cable onto the antenna terminal on the back of
your TV.