Audiovox AVT1345 CRT Television User Manual


 
If your cable system requires you to use a converter box for all channels,
connect the incoming cable to the IN terminal on the converter box. Connect another
cable between the OUT terminal on the converter box and the out terminal on your
TV. You will need to keep your TV tuned to channel 3 or 4 and change channels
using your converter box.
If your cable system only requires you to use a converter box for some
channels (i.e. pay-TV channels), follow these steps: find the primary incoming
coaxial cable. Plug this cable into a splitter (available at your local electronics store).
Connect one coaxial cable between one OUT terminal on the splitter and the IN
terminal on the converter box. Connect another coaxial between the other OUT
terminal on the splitter and the B-IN terminal on an A/B switch (available at your local
electronics store). Connect a third coaxial cable between the OUT terminal on the
converter box and the A-IN terminal on the A/B switch. Finally, connect a coaxial
cable between the OUT terminal on the A/B switch and the antenna terminal on the
back of your TV.
When the A/B switch is in the A position, you need to change channels on the
converter box (and your TV should be tuned to channel 3 or 4): when the A/B switch
is in B position you can change channels on the TV.
Connecting Other Pieces of Equipment
You may want to connect a VCR, laser disc player, satellite receiver, or another type
of equipment to your TV. We recommend that you follow the instructions included
with the piece of equipment you wish to connect.
Safety Note
If you plan on being away from your home for an extended period of time, or if a
thunderstorm is approaching, you should unplug your television, and you may wish to
disconnect your TV from a roof top or satellite antenna. You do not need to
disconnect your TV from a cable system.
Chapter 2: Connecting an Antenna or Cable to your TV-9