Audiovox AVT1345 CRT Television User Manual


 
Using Timer Functions
Your TV has a built-in clock, and you can set the TV to turn on and off at times that you
select. You can also set your TV to turn off after counting down a certain amount of time.
Setting the Clock
1. With the TV turned on, press the MENU button until Timemenu is displayed.
2. The Set Clockitem will be selected. Press the ÿ VOL ÷ buttons to set the clock. If
you hold down either ÿ VOL or VOL ÷ button, the corresponding numbers will change
more quickly.
3. When the clock is set correctly, use the ù CH ü buttons to select another Time
function, or press the MENU button until menu OSD will disappear.
Setting the Wake-Up timer
If you enter a time in the Wake-Up timesetting, your TV will automatically turn on at that
time. Follow these instructions to set the Wake-Up time.
After the Wake-Up Timer has turned on the TV set, if the user does not input the user
control (e.g. remote CH or VOL key) within 15 minutes, the TV set will turn off
automatically. If the user inputs the user control within15 minutes, the TV set will turn on
continuously.
It is a safety feature for prevention of any kind of problem without human control.
1. With the TV turned on, press the MENU button until Timemenu is displayed.
2. Use the ù CH ü buttons to select Wake-Up Timeitem.
3. If you hold down either ÿ VOL or VOL ÷ button, the corresponding numbers will change
more quickly.
4. When the setting is correct, use the ù CH ü buttons to select another Timefunction,
or press the MENU button until menu OSD is displayed.
Chapter 4: Using Timer Functions-15