Filter
Top Products
Returning to the Factory Settings
If you would like to return to the original video settings, as they were calibrated at the
factory, follow these steps:
1. With the TV on, press the MENU button, then “Video” menu will appear.
2. Press the ÿ VOL ÷ buttons to set the “Settings” to “Preset”.
The TV will remember the “Custom” settings you had previously chosen. When you set
“Settings” to “Custom” again, your previous custom settings will be restored.
Descriptions of Video settings
The contrast setting controls the relation between the light and black of the screen. If the
light areas are too bright and are loosing details, press the ÿ VOL button: if the picture is
gray and lacks contrast, press the VOL ÷ button.
The brightness settings controls the overall amount of light in the picture. If the picture is too
bright, press the ÿ VOL button: if the picture is too dark, press the VOL ÷ button.
Sharpness controls how the TV displays edges of objects on screen. If the TV shows
multiple vertical lines at the edges of an object, press the ÿ VOL button: if the vertical
edges of an on-screen objects are fuzzy, press the VOL ÷ button.
The color setting controls the intensity of color. If the color is over-saturated, press the ÿ
VOL button: if the color is washed out. Press the VOL ÷ button.
The tint setting controls the relationship of red and green in a picture. Tint is especially
noticeable in flesh tones. If the flesh tones seem too red or purple, press the VOL ÷ button:
if flesh tones are too green, press the ÿ VOL button.
14- Chapter 3: Operating Your TV