Filter
Top Products
28
PD-200
If you plan to suspend use of the player for a
significant period of time, it is recommended
that the power cord (or batteries) be removed
to prevent unnecessary power drain.
A note regarding the automatic power
saving
Once the player has been stopped for over ap-
proximately five minutes, the system will enter
“standby” mode and is prepared to respond im-
mediately to a power up. In standby mode,
power consumption is reduced to a minimum
level to save power, the front LCD status win-
dow will read “oFF”. The player could be turned
back on by pressing the “POWER” button on
the remote control or by switching the ON/OFF
button on the left side of the player.
In the case battery pack is used for operating
the player and the standby mode is activated
for 10 seconds, the system will then totally cut
down the power consumption, the front LCD
status window will now go out, showing no mes-
sages. The battery power is reserved.
5 Player Controls (6)