Filter
Top Products
23
O. Setup
System Setup Page
1) With no disc inside the player, press ‘SETUP’ to display the Main screen
of the Setup Menu on the screen and “SYSTEM SETUP” appears. At the sam
e time, “ ” is highlighted. Press ‘SETUP’ again to exit the Setup Menu .
2) Press the
button, “Screen Saver” is highlighted.
3) Press the
or
button to select the other menus in system setup page.
4) Press
to enter the sub menu.
5) Press the
or
button to select the sub menu and press the ENTER to
confirm your selection.
6) Repeat steps 3-5 for other menus.
Note: Press
to return the previous menu.
SCREEN SAVER
*On: Enables screen saver
*Off: Disables screen saver (off)
*Note: The DVD player will enter the Screen Saver mode after approximately
five minutes if the same image remains on the screen.
ANGLE MARK
* On: The screen will show the angle mark icon.
(*If an angle option is available).
* Off: The screen will not display the Angle Mark
Note: Not all discs contain above features. The above features are disc
dependent.
PDF created with FinePrint pdfFactory Pro trial version http://www.fineprint.com