Filter
Top Products
System Connections
Connecting To External AV Signal Source (AV2)
Use the audio and video cable to connect the input jacks on the right side of the unit’s rear panel to
the external AV signal source.
Also use the S-Video cable to connect the S-Video input jack on the right side of the unit’s rear panel
to the external AV signal source.
Note: S-VIDEO cable will produces higher quality images.
After connecting, turn on the power of the unit and the external AV signal source, press the Input
button to invoke the Input menu, then select AV2 (Composite) and press the Enter button to activate
the selected mode.
If connected to the two group AV and S-Video signal sources at the same time, the S-Video is the
priority. If the other two AV inputs have a video signal applied at the same time a signal is present
at the S-Video connector, the S-Video signal will take priority over the other two.
- 14 -