Filter
Top Products
10
3. Insert a hex-head bolt into each of the Channel Inserts. Insure
that the bolt head fits into the hexagon recess on the insert.
4. Slide the Channel Inserts into the channel on the back of the
TV55 - the bolts should be pointing away from the antenna.
See Fig 7.
5. Unscrew the Window Mount Bracket so you can separate the
two pieces (Channel Insert Bracket and Window Frame Bracket)
– keep the screw since you will need to use it again.
6. Attach the Channel Insert Brackets onto the channel insert bolt
on the TV55. See Fig 8. Tighten with split washers and hex nuts.
TV55
Fig 7.
Fig 8.