Filter
Top Products
8
3. Use the #10 screws and plastic anchors to secure each of the
Wall-Mount Cam-lock units into the wall at the marks made in
Step #2. (As an alternative mounting method, you may choose
to use longer screws directly attached into wood supports, wall
studs, or use a different wall-anchoring device.) Make sure the
Cam-lock wings are vertical. See Fig 3.
4. Carefully position the TV55 antenna so that the Cam-locks slide
into the channel on the rear of the antenna. See Fig 4.
5. Once the Cam-locks are in the channel properly, turn the Cam-
locks 1/4-turn to secure the antenna. Do not turn these more
than necessary to lock into the antenna and secure it snugly.
See Fig 5.
Note: If the Cam-locks do not lock securely, you may need to
adjust the location of the Cam-locks along the channel.
6. Skip to the “Connecting the TV55 Antenna to a TV” section to
finish installation.
TV55
Fig 4.
Fig 5.