Filter
Top Products
12
Outdoors using Mast Mounting:
1. Locate:
(1) Channel Insert
(1) Mast Mount Base and Cover
(1) 1 1/2" hex-head bolt
(1) 2 1/2" hex-head bolt
(1) Hex nut
(1) Wing nut
2. Insert both hex-head bolts into
the Channel Insert at the hex-head recess. Slide the Channel
Insert into the channel on the back of the TV55. The bolts should
be pointing away from the antenna. See Fig 10.
3. Take the Mast Bracket Base and insert it over the bolts on
the Channel Insert, with the
1 1/2" bolt closest to the hinge. Center the Mast Bracket on the
TV55. Secure and tighten the 1 1/2" bolt with a hex nut. Do not
over tighten. See Fig 11.
TV55
Fig 11.
Fig 10.