Filter
Top Products
Chapter 4 Using the AVerEPack
23
LED : If the LED is on, it indicates that the AVerEPack300 has been
powered on.
If the LED blinks, the system is loading the slide or the
CompactFlash Card is not properly inserted.
Menu Functions
AVerEPack300 provides a menu function for opening a slide presentation folder
from the CompactFlash card, setting the presentation TIMER and slide timer delay,
adjusting the slide size horizontally and vertically, fine tuning your slide display
and more. Available menu functions may vary with different slide preview and
mode.
Press the MENU button to view the MENU functions. Then use the
POSITIONING & ADJUSTMENT CONTROL buttons of the remote. Press
the UP or DOWN button to select your desired function. (The selected function
will be highlighted in red.) To adjust the setting of the your selected function, press
the LEFT or RIGHT button. The function that appears in yellow is not available.
In full view slide preview, the menu functions are as follow:
FOLDER : Allows you to open to another existing folder. A list of folder names
and the total number of slides per folder will appear.
VGA : Allows you to switch between SVGA, XVGA or VGA. This
function is available when you are in VGA mode.
WIDTH : Press the RIGHT button to increase and the LEFT button to
decrease the width of the projected image.
HEIGHT : Press the RIGHT button to increase and the LEFT button to
decrease the height of the projected image.
FOLDER
VGA OUTPUT
WIDTH
HEIGHT
SHARPNESS
BRIGHTNESS
SLIDE DELAY
TIMER
TRANSITION
TV SYSTEM: NTSC
0
0
3
0
ON
V
GA OUTPUT
TV SYSTEM: NTSC